Calculate the total time required to harvest 4 hectares of grass by means of a 2mm mower being operated at the speed of 4 km/h. Assume field efficiency of mower as 75%?

← Prev Question Next Question →

1 Answer

Related questions

+2 votes

1 answer

Calculate the total time required to harvest 2.5 hectares of grass by means of a 2 metre mower being operated at 4 km/hr. (Field efficiency=80%)

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

How many hectares of grass per day of 15 hours can be cut by a mower being operated at the speed of 4.5 km/h and with 4 m cutter bar.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A disc type mower is operated by PTO with 6 discs with a shaft of 0.4 m/disc. The specific energy required for cutting is 2.1 KJ/m^2 and specific power losses due to air come stubble and gear train friction is 2 kw/m of cutting width. If the mower with tractor requires a propelling force of 2 KN the total power requirement for carrying out moving in Kw at forward speed of 3 km/h is ____

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A 2m mower is operating at 3.5 km/h with an overall efficiency of 75%. Calculate the area covered by it in ha/h.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

What power is required to pull 1.2 mete mower working at a speed of 4.8 km/hr, if there is a load of 50 kg per metre length of mower and mechanical efficiency is 80%?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A mower has driven wheel of 60 cm diameter. The crank of mower makes 550 rpm, when it is driven by a tractor at a speed of 2 km/h. If speed ratio between the crank wheel and land wheel is changed to 27:1, calculate the increase in speed of mower to maintain the same speed of crank.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A 4-row animal drawn wheat seed drill with 300 mm row-to-row spacing is operated at 1.5 km/h. If the time loss, based on observed total time in seeding 1 ha arc is 15% in turning, 10% in seed filling and 10% in mechanical down time, then what is the field efficiency?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

What horsepower will be required to pull 1.2 m mower working at the speed of 5 km/m length of the mower ad mechanical efficiency is 85%?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A mower has drive wheel of 60 cm diameter. The crank of the mower makes 600 rev/min when it is driven by a tractor, moving at a speed of 2.3 km/hr. If the speed ratio between the crank wheel and land wheel is changed to 27:1, calculate the increase in speed of mower to maintain same speed of crank.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Total draft of four bottom, 40cm Mb plough when ploughing 17.5 cm deep at 5.5 km/hr speed is 1700. Field efficiency is 75%. Calculate the actual power requirement.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A 4*100 cm seed drill is to be operated at a forward speed of 3.6 km/h. The diameter of the ground wheel is 50 cm. a cup type metering mechanism with 10 cells on its periphery is used for dropping one seed in a hill. Power transmitted from the ground wheel shaft to the metering shaft with the help of chain and sprocket arrangement. If the desired plant population is 6000 per hectare and average emergence is 75% speed ratio between ground wheel shaft and metering shaft will be ____________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Calculate the time required for sowing 1 hectares of land by 5 furrows seed drill going 12 cm deep. The speed of seed drill is 3.5 km/h and pressure exerted by the soil on the seed drill is 0.42 kg/cm^2. The space between furrow openers is 10 cm and turning loss is 10%.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Calculate the time and power for sowing four hectares of and by a 7-furrow seed drill, going 6 cm deep. The speed of the seed drill is 4 km/hour and the pressure exerted by soil on the seed drill is 0.42 kg/cm^2. The spacing between the two furrow openers is 15 cm. Loss of turning is 5%.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Calculate the size of tractor to pull a four bottom 35 cm MB plough through a depth of 10 cm. the soil resistance is 0.5 kg/cm^2. The speed of the tractor is 5.5 km/h, the transmission and tractive efficiency of the tractor being 85% and 30% respectively.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Calculate the time required for sowing 1.6 hectares of land by five furrows seed drill going 12.5 cm deep. The speed of seed drill is 3.2 km/hr and pressure exerted by the soil on the seed drill is 0.42 kg/cm^2. The space between furrow openers is 10 cm and loss in turning is 10%.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In mower, the grass board is provided at the ___________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

How many hectares per day of 10 hours can be cut by a combine with 4 metre cutter bar, when it is running at 4 k/hr?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Calculate the time required to sow 1 hectare of land with a bullock drawn seeder of size 5*15 cm. the operating speed is 3.5 km/h and loss due to turning is 20%.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A pump was installed in a field to supply water to the crops. The duty for this crop is 432 hectares/cumec on the field and the efficiency of pump is 50%. The sown area of the field is 5 hectares. Determine the maximum output required (H.P) of the pump, if the highest water level is 4 meters below the highest portion of the field. Assume negligible field channel losses.

asked Aug 16, 2023 in Irrigation Engineering by Carter (75.2k points)

+1 vote

1 answer

A four bottom 40 cm MB plough has a working depth of 15 cm and draft of 1600 kg. It is working at a speed of 15 cm and draft of 1600 kg. it is working at a speed of 4.5 km/hr with field efficiency of 70%. What will be the drawbar power?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A power operated chaff cutter is used for cutting Napier grass of density 640 kg/m^3 at 800 rpm speed. If blades make a clearance angle of 18° between the knife support assembly and the plan of rotation and distance of inner edge of throat from flywheel centre is 10 cm. What will be the theoretical length of cut without feed interference using 4 knives?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

An air blast of sprayer is to be operated at 3 km/h and application rate is 18 l/tree. The spacing is 9m*9m and each nozzle delivers 5 lit/min and operating process of 4*10^5 N/m^2. If one half row is sprayed from each side of the machine. How many sprayers will be needed?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor drawn seed drill is operated in the field at a forward speed of 5 km/hour. The effective diameter of the ground wheel of the seed drill is 0.5 m and the transmission ratio between ground wheel and metering rollers is 1.1. if the skid of the ground wheel of the drill is 10%, the speed of metering rollers in rpm will be ______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A field sprayer having a horizontal boom with 20 nozzles spaced 40 cm apart is to be designed for maximum application rate of 650 l/ha at nozzle pressure of kPa and forward speed of km/h. What will be the pump capacity in l/min?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A hydraulic sprayer fitted with hollow nozzle is required to be calibrated for application rate 150 L/ha. The sprayer speed is 6.5 km/h. Nozzle spacing is 50 cm. The available 0.787 mm orifice diameter. Nozzle is rated at 0.473 L/min. What is the nozzle flow rate?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

...