An air blast of sprayer is to be operated at 3 km/h and application rate is 18 l/tree. The spacing is 9m9m and each nozzle delivers 5 lit/min and operating process of 410^5 N/m^2. If one half row is sprayed from each side of the machine. How many sprayers will be needed?

Question

An air blast of sprayer is to be operated at 3 km/h and application rate is 18 l/tree. The spacing is 9m9m and each nozzle delivers 5 lit/min and operating process of 410^5 N/m^2. If one half row is sprayed from each side of the machine. How many sprayers will be needed?

1 Answer

Related questions

+2 votes

1 answer

An air blast of sprayers is to be operated at 3 km/hour and desired application rate is 18 l/tree. The tree spacing is 9*9 m and nozzle delivers 5 l/min at operating pressure of 4*10^5 N/m^2. How many nozzles would be needed?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A hydraulic sprayer fitted with hollow nozzle is required to be calibrated for application rate 150 L/ha. The sprayer speed is 6.5 km/h. Nozzle spacing is 50 cm. The available 0.787 mm orifice diameter. Nozzle is rated at 0.473 L/min. What is the nozzle flow rate?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A hydraulic sprayer fitted with hollow cone nozzle is required to be calibrated for application rate 150 l/ha. The sprayer speed is 6.5/h, nozzle spacing is 50 cm, and the available 0.787 mm orifice diameter nozzle is rated at 0.473 l/min. What will be the nozzle flow rate?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A field sprayer having a horizontal boom with 20 nozzles spaced 40 cm apart is to be designed for maximum application rate of 650 l/ha at nozzle pressure of kPa and forward speed of km/h. What will be the pump capacity in l/min?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A sprayer having 0.4 L/min nozzle discharge rate and 50 cm width of coverage is required to apply 0.8 kg of active ingredient per hectare. If 1 kg of active ingredient is content in 120 L of spray solution. What will be the speed of travel of sprayer?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A side dressing fertilizer applicator is to plough two bands per row on a crop with 1 m row spacing at an application rate of 600 kg/hour. If the machine is calibrated by driving it forward over a distance of 50 m, the mass of material collected from each delivery tube is _________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor sprayer is fitted with 20 hollow cones nozzles to attain application rate of 200 l/hr. During the calibration test, the nozzle flow rate was found to be 1.25 l/min whereas, the rated nozzle flow rate was found to be 0.473 l/min was available at 275 kPa. If the nozzle produces droplets with volume median diameter 200 μm at 1 Mg Pascal, the droplet at the desire flow rate is?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A 4*100 cm seed drill is to be operated at a forward speed of 3.6 km/h. The diameter of the ground wheel is 50 cm. a cup type metering mechanism with 10 cells on its periphery is used for dropping one seed in a hill. Power transmitted from the ground wheel shaft to the metering shaft with the help of chain and sprocket arrangement. If the desired plant population is 6000 per hectare and average emergence is 75% speed ratio between ground wheel shaft and metering shaft will be ____________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

During a discharge measured through a hydraulic spray nozzle was 450*10^-6m^3/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%. The percent increase in discharge will be _______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A 4-row animal drawn wheat seed drill with 300 mm row-to-row spacing is operated at 1.5 km/h. If the time loss, based on observed total time in seeding 1 ha arc is 15% in turning, 10% in seed filling and 10% in mechanical down time, then what is the field efficiency?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

During a test, discharge measured through a hydraulic spray nozzle was 45010^-6 m^3/min at nozzle operating pressure of 284 kPa. If the pressure is increased by 10%, the percent increase in discharge will be ________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A disc type mower is operated by PTO with 6 discs with a shaft of 0.4 m/disc. The specific energy required for cutting is 2.1 KJ/m^2 and specific power losses due to air come stubble and gear train friction is 2 kw/m of cutting width. If the mower with tractor requires a propelling force of 2 KN the total power requirement for carrying out moving in Kw at forward speed of 3 km/h is ____

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

How many hectares of grass per day of 15 hours can be cut by a mower being operated at the speed of 4.5 km/h and with 4 m cutter bar.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A sprayer having 0.4 litre per minute nozzle discharge rate and 50 cm width of coverage, is required to apply 0.8 kg of active ingredient per hectare. If one kg of active ingredient is contained in 120 litres of spray solution, determine the speed of the sprayer.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A seed drill has 8 cells on cup feed metering mechanism. The rolling of ground wheel to that of the roller is 2:3. If drilling is done at a forward speed of 3.5 km/h, spacing in the rows in mm will be ___________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

An animal drawn 3*20 wheat seed drill is equipped with a fluted roller type metering mechanism. What will be the exposed length of the fluted roller for each row if the machine is to be calibrated for seed rate of 100 kg/ha. Assuming there is no slippage in the ground wheel or in the transmission during field operations.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A power operated chaff cutter is used for cutting Napier grass of density 640 kg/m^3 at 800 rpm speed. If blades make a clearance angle of 18° between the knife support assembly and the plan of rotation and distance of inner edge of throat from flywheel centre is 10 cm. What will be the theoretical length of cut without feed interference using 4 knives?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A 2-wheel drive 35 HP tractor has 1.5 m rear wheel diameter. The engine runs at 1200 rev/min. The total reduction of speed is 30:1. Find the travelling speed of the tractor in km/h and tractive force at each driving wheel.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Find the suction capacity of a power sprayer if diameter is 25 m, speed is 1100 rev/min length of stroke is 22 mm, number of plunger is 3.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A hydraulic circuit uses 25 litres of fluid per min. The fluid is supplied by a pump having a fixed displacement of 12.5 cm^3 per revolution driven at 3000 rpm. The pump has a volumetric efficiency of 0.85 and torque efficiency of 0.88. If the system pressure is set at 18 MPa by the relief valve. What will be the power required to drive the pump?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

What will be the water power which is required to discharge liquid at the rate of 30 litres/min at 30 kg/cm^2 pressure?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A 2-wheel drive 35hp tractor has 1.5 rear wheel diameter. The engine runs at 1200 rev/min. the total reduction of speed is 30:1. Find the travelling speed of the tractor in km/h and the tractive force at each driving wheel.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor drawn seed drill is operated in the field at a forward speed of 5 km/hour. The effective diameter of the ground wheel of the seed drill is 0.5 m and the transmission ratio between ground wheel and metering rollers is 1.1. if the skid of the ground wheel of the drill is 10%, the speed of metering rollers in rpm will be ______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The combined mass of bicycle and rider is 100 kg, they are travelling at the speed of 16 km/h on a level road. Diameter of rear wheel is 0.9m. How far will the bicycle travel after the application of brake? The pressure applied on the brake is 100 N and μ = 0.05.

asked Sep 22, 2022 in Machine Dynamics by Grayson (34.3k points)

+1 vote

1 answer

A flat blade turbine having six blades is centrally installed in a vertical tank. The tank is 6 ft (1.83 m) in diameter; the turbine is 2 ft. (0.61 m) in diameter and is positioned 2 ft (0.61 m) from the bottom of the tank. The turbine blades are 5 in. (127 mm) wide. The tank is filled to a depth of 6 ft (1.83 m) with a solution of 50 percent caustic soda, at 150°F (65.6°C), which has a viscosity of 12 cP and a density of 93.5 lb/ft^3 (1498 kg/m^3). The turbine is operated at 90 r/min. the tank is baffled. What power will be required to operate the mixer? (Given KL=403680).

asked Feb 2, 2022 in Food Processing Unit Operations by Ava (110k points)

An air blast of sprayer is to be operated at 3 km/h and application rate is 18 l/tree. The spacing is 9m9m and each nozzle delivers 5 lit/min and operating process of 410^5 N/m^2. If one half row is sprayed from each side of the machine. How many sprayers will be needed?

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.

Related questions

Categories

An air blast of sprayer is to be operated at 3 km/h and application rate is 18 l/tree. The spacing is 9m*9m and each nozzle delivers 5 lit/min and operating process of 4*10^5 N/m^2. If one half row is sprayed from each side of the machine. How many sprayers will be needed?

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.

Related questions

Categories

An air blast of sprayer is to be operated at 3 km/h and application rate is 18 l/tree. The spacing is 9m9m and each nozzle delivers 5 lit/min and operating process of 410^5 N/m^2. If one half row is sprayed from each side of the machine. How many sprayers will be needed?