A power operated chaff cutter with 6 knives is rotating at 600 rpm. It is having a convey type feeding mechanism which is operating at a speed of 0.6 m/s.

Question

A power operated chaff cutter with 6 knives is rotating at 600 rpm. It is having a convey type feeding mechanism which is operating at a speed of 0.6 m/s.

1 Answer

Related questions

+1 vote

1 answer

A power operated chaff cutter is used for cutting Napier grass of density 640 kg/m^3 at 800 rpm speed. If blades make a clearance angle of 18° between the knife support assembly and the plan of rotation and distance of inner edge of throat from flywheel centre is 10 cm. What will be the theoretical length of cut without feed interference using 4 knives?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The flywheel of a hand operated chaff cutter with 4 cutting knives is rotated at 60 rpm and is connected to worm gear assembly for rotating feed rollers. The number of teeth and threads of worm gear and worm are 20 and 2 respectively. What would be the chaff length? (Diameter of feed roller is 15 cm)

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A field chaff cutter with cutter head has 4 knives and diameter of 650 mm. The given peripheral speed is 30 m/s and throat size is 45*15 cm. For 20 mm length of cut with corn silage what will be the linear speed and rated feeding capacity?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The diameter of feed roller of a conveyor type power chaff cutter is 100mm and they are rotating at 100 rpm for cutting the dry fodder. The effective length of each feed roller is 0.25 m and average clearance between them is 0.015 mm. The compression density while passing through feed roller is 350 kg/m^3. What will be the capacity of chaff cutter?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A chaff cutter having 2 knives cuts dry hay at 60 rpm giving 580 kg/h. If throat size is 19*16 cm and length of cut is 2.6 cm, what will be the effective density of dry hay?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The flywheel of a power operated chaff cutter receives the power through belt and pulley arrangement from an electric motor, running at 1600 rpm speed. The motor pulley has a diameter of 10 cm, while that of the pulley mounted on a flywheel shaft is 50 cm. The speed ratio between the flywheel and worm gear of diameter 15 cm is 7:1. What would be the rpm of flywheel and worm gear?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A cylinder type chaff cutter head in a direct throw field chopper has 5 knives and diameter as 450 mm. The throat size is 40*12 cm for 15 mm theoretical length of cut with corn silage. What will be the rated capacity in megagrams per hours at 100% field efficiency?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A disc type mower is operated by PTO with 6 discs with a shaft of 0.4 m/disc. The specific energy required for cutting is 2.1 KJ/m^2 and specific power losses due to air come stubble and gear train friction is 2 kw/m of cutting width. If the mower with tractor requires a propelling force of 2 KN the total power requirement for carrying out moving in Kw at forward speed of 3 km/h is ____

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A 4*100 cm seed drill is to be operated at a forward speed of 3.6 km/h. The diameter of the ground wheel is 50 cm. a cup type metering mechanism with 10 cells on its periphery is used for dropping one seed in a hill. Power transmitted from the ground wheel shaft to the metering shaft with the help of chain and sprocket arrangement. If the desired plant population is 6000 per hectare and average emergence is 75% speed ratio between ground wheel shaft and metering shaft will be ____________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A two-bladed flywheel type forge cutter rotates at 50 rev/min at a feed rate of 1.26 m/min. What will be the theoretical length of cut of forge?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

While testing a wheat thresher at recommended throughout 80 Nm torque is recorded at 850 rpm at the main shaft of the threshing cylinder, which is operated by a 200-mm diameter pulley. The overload factor and unit mass of V-belt are 1.2 and 0.9 kg/m respectively. At condition of maximum power transfer the maximum tension in V-belt in N is __________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

While testing a wheat thresher at recommended throughout, 80 Nm torque is recorded at 750 rpm at the main shaft of the threshing cylinder, which is operated by a 200-mm diameter V pulley. The overload factor and unit mass of V-belt are 1.2 and 0.9 kg/m respectively. At condition of maximum power transfer the maximum tension in V-belt in N is ________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

How many hectares of grass per day of 15 hours can be cut by a mower being operated at the speed of 4.5 km/h and with 4 m cutter bar.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor drawn seed drill is operated in the field at a forward speed of 5 km/hour. The effective diameter of the ground wheel of the seed drill is 0.5 m and the transmission ratio between ground wheel and metering rollers is 1.1. if the skid of the ground wheel of the drill is 10%, the speed of metering rollers in rpm will be ______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In a belt drive, the mass of the belt is 10 kg/m and its speed is 6 m/s. The drive transmits 20 KW of power. Determine the initial tension in the belt and the strength of the belt. The co-efficient of friction is 0.25 and wrap angle is 220°.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

In a belt drive the mass of the belt is 1 kg/m and its speed is 6m/s. The drive transmits 9.6 KW of power. Determine the strength of the belt when the coefficient of friction is 0.25 and wrap angle is 220°.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A flat blade turbine having six blades is centrally installed in a vertical tank. The tank is 6 ft (1.83 m) in diameter; the turbine is 2 ft. (0.61 m) in diameter and is positioned 2 ft (0.61 m) from the bottom of the tank. The turbine blades are 5 in. (127 mm) wide. The tank is filled to a depth of 6 ft (1.83 m) with a solution of 50 percent caustic soda, at 150°F (65.6°C), which has a viscosity of 12 cP and a density of 93.5 lb/ft^3 (1498 kg/m^3). The turbine is operated at 90 r/min. the tank is baffled. What power will be required to operate the mixer? (Given KL=403680).

asked Feb 2, 2022 in Food Processing Unit Operations by Ava (110k points)

+1 vote

1 answer

Find suction capacity of power sprayer, if diameter is 25 mm, speed is 1100 revolution/minute, length of stroke is 20 mm and number of plunger is 4.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

An electric motor drives a machine through a speed reducing gear of ratio 9:1. The motor armature, with its shaft and gear wheel, has moment of inertia 0.6 kg-m^2. The rotating part of the driven machine has moment of inertia 45 kg-m^2. The driven machine has resisting torque of 100 N-m and the efficiency of reduction gear is 95%. Find the power which the motor must develop to drive the machine at a uniform speed of 160 r.p.m.

asked Sep 23, 2022 in Machine Kinematics by Leo (38.0k points)

+1 vote

1 answer

A three-tine cultivator having tine spacing 6 cm, working depth of 3 cm and speed is 2 km/hr. Turning loss is 10%. Soil resistance is 0.6 kg/cm^2. Width of furrow is 6 cm. What will be the required power?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A four-stroke diesel engine operating at 1200 rpm uses 0.1 kg of fuel in 5 minutes and develops a torque of 7.5 kg-m. What is the brake specific fuel consumption.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A hydraulic circuit uses 25 litres of fluid per min. The fluid is supplied by a pump having a fixed displacement of 12.5 cm^3 per revolution driven at 3000 rpm. The pump has a volumetric efficiency of 0.85 and torque efficiency of 0.88. If the system pressure is set at 18 MPa by the relief valve. What will be the power required to drive the pump?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A countershaft of engineering workshop is driven by electric motor with the help of canvas belt and pulley arrangement such that the speed of bet is 600 m/min and it transmits 50 KW. Find the difference between tension on either side of the belt.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A counter shaft of engineering workshop is being driven by electric motor with the help of canvas belt and pulley arrangement such that the speed of belt is 600 m/min and it transmits 50 KW. What will be the difference between tensions on either side of the belt?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Calculate the power transmitted by the belt and pulley arrangement, if tension on tight side of the belt is 50 kg and tension on slack side is 25 kg. The diameter and speed of driving pulley is 0.95 m and 350 rpm.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

A power operated chaff cutter with 6 knives is rotating at 600 rpm. It is having a convey type feeding mechanism which is operating at a speed of 0.6 m/s.

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.

Related questions

Categories