The average speed of engine connected to governor is 1500 rpm. If the fluctuation in speed is +-100 rpm, then % governor regulation is ______

← Prev Question Next Question →

1 Answer

Related questions

+1 vote

1 answer

The high idle speed of engine is 2240 rpm. The peak torque of 180 Nm occurs, at 1450 engine rpm. If the lugging ability is 28 Nm. The engine power in KW at governor’s maximum position will be _________ (Governor regulation = 11.5%)

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

At an engine throttle position of 75% the high idle speed of engine is shifted by 200 rpm towards maximum torque position. If the engine is maintaining a uniform speed of 2475 rps at given load, governor regulation is _____

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A Proell governor has equal arms of length 300 mm. The upper and lower ends of the arms are pivoted on the axis of the governor. The extension arms of the lower links are each 80 mm long and parallel to the axis when the radii of rotation of the balls are 150 mm and 200 mm. The mass of each ball is 10 kg and the mass of the central load is 100 kg. Determine the range of speed of the governor.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Varying the governor setting in an IC engine

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Which governor is known as sensitive governor?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Which governor does not achieve ISOCHRONOUS behaviour?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Who theoretically analysed James Watt’s design as a mathematical energy balance purpose?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In an epicyclic gear train, one arm carries two wheels A and B having 25 teeth and 35 teeth respectively. If the arm rotates at 100 rpm in clockwise direction about centre of wheel A which is fixed, then speed of wheel on its own axis will be?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

In an epicyclic gear train, an arm carries two wheels ‘A’ and ‘B’ having 24 teeth and 30 teeth respectively. If the arm rotates at 100 rpm in the clockwise direction about the centre of the wheel. ‘A’ which is fixed, then the speed of wheel on its own axis is _____

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

What is the regulation of speed when speed at no load of engine is 1973 rpm and speed at load is 1873 rpm?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

For a certain engine having an average speed of 1200 rpm, a flywheel approximated as a solid disc, is required for keeping the fluctuation of speed within 2% about the average speed. The fluctuation of kinetic energy per cycle is found to be 2 kJ. What is the least possible mass of the flywheel if its diameter is not to exceed 1 m ?

asked Sep 22, 2022 in Machine Dynamics by Grayson (34.3k points)

+1 vote

1 answer

A four cylinder two- stroke cycle engine with a swept volume of 750 cm^3 per cylinder gives a specific fuel consumption of 0.25 kg KW^-1 h^-1. When developing a brake mean effective mean pressure 650 kPa at 1500 rpm. What is the brake thermal efficiency, if the calorific value is 40 MJ kg^-1?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A 4*100 cm seed drill is to be operated at a forward speed of 3.6 km/h. The diameter of the ground wheel is 50 cm. a cup type metering mechanism with 10 cells on its periphery is used for dropping one seed in a hill. Power transmitted from the ground wheel shaft to the metering shaft with the help of chain and sprocket arrangement. If the desired plant population is 6000 per hectare and average emergence is 75% speed ratio between ground wheel shaft and metering shaft will be ____________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Find the gear ratio of a tractor of its final drive of tractor has 1.2 m tractor wheel and forward speed of 5km/h. When engine is running at 1000 rpm if reduction in transmission is 3:1

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

For a multicylinder engine, the moment of inertia of a flywheel is 6500 kg-m^2, from the turning moment diagram, it is found that fluctuation of energy is 56000 N-m, if mean speed is 120 rpm, then find maximum speed.

asked Sep 22, 2022 in Machine Dynamics by Grayson (34.3k points)

+1 vote

1 answer

If L is the stroke and N is the rpm, mean piston speed of two stroke engine is _______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor drawn seed drill is operated in the field at a forward speed of 5 km/hour. The effective diameter of the ground wheel of the seed drill is 0.5 m and the transmission ratio between ground wheel and metering rollers is 1.1. if the skid of the ground wheel of the drill is 10%, the speed of metering rollers in rpm will be ______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The diameter of feed roller of a conveyor type power chaff cutter is 100mm and they are rotating at 100 rpm for cutting the dry fodder. The effective length of each feed roller is 0.25 m and average clearance between them is 0.015 mm. The compression density while passing through feed roller is 350 kg/m^3. What will be the capacity of chaff cutter?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

How many revolutions will each spindle of cotton picker make in the picking zone for a chain belt arrangement in which the speed of spindle is 1400 rpm and remains in the picking zone during 100 cm of forward travel.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

The speed reduction in 1^st low gear of tractor box and differential with final drive are 5:1 and 45:1 for a tractor developing 30 KW at engine at an rpm of 2500 with overall efficiency of 85%. The torque is KN-m available at wheel axle?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A 10 teeth sprocket is operating at 200 rpm and driving a 25 teeth sprocket through a chain. The pitch of the chain is 20 mm and ultimate strength is 20 KN. Calculate the average linear speed.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Diameter and stroke length of the piston of a 4 stroke-4-cylinder diesel engine are 10 cm and 12 cm respectively and speed of crank shaft is 2000 rpm. Calculate brake power.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A mower has driven wheel of 60 cm diameter. The crank of mower makes 550 rpm, when it is driven by a tractor at a speed of 2 km/h. If speed ratio between the crank wheel and land wheel is changed to 27:1, calculate the increase in speed of mower to maintain the same speed of crank.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In a tractor differential, the pinion on the propeller shaft has 12 teeth and the crown gear has 50 teeth. The propeller shaft rotates at 1500 rpm and the right rear axle rotates at 250 rpm while taking a left turn. The rotation of the left axle in rpm will be __________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Two shafts having an included angle of 150° are connected by a Hooke’s joint. The driving shaft runs at a uniform speed of 1500 r.p.m. The driven shaft carries a flywheel of mass 12 kg and 100 mm radius of gyration. Using the above data, calculate the maximum angular acceleration of the driven shaft in rad/s^2.

asked Sep 25, 2022 in Machine Kinematics by Leo (38.0k points)

...