Worm gear is used, when two shafts are at _________

← Prev Question Next Question →

1 Answer

Related questions

+1 vote

1 answer

Chain and sprocket drive is preferred, when two parallel shafts are placed at a distance of _______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In an epicyclic gear train, one arm carries two wheels A and B having 25 teeth and 35 teeth respectively. If the arm rotates at 100 rpm in clockwise direction about centre of wheel A which is fixed, then speed of wheel on its own axis will be?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Helical gear is used for transmitting the power between two ___________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

The speed reduction in 1^st low gear of tractor box and differential with final drive are 5:1 and 45:1 for a tractor developing 30 KW at engine at an rpm of 2500 with overall efficiency of 85%. The torque is KN-m available at wheel axle?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

In an epicyclic gear train, the sun gear on the input shaft is 20 teeth external gear. The planet gear is a 40 teeth external gear and the ring gear is a 100 teeth internal gear. The ring gear is fixed and the sun gear is rotating at 60 rpm counter clockwise. The arm attached to output shaft will rotate at ________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The number of teeth in driving spur gear is 60. The circular pitch of the teeth is 15 mm. the tangential force transmitted is 140 kg. Calculate horsepower transmitted to the driven gear at 180 rpm of driving gear.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In a tractor differential, the pinion on the propeller shaft has 12 teeth and the crown gear has 50 teeth. The propeller shaft rotates at 1500 rpm and the right rear axle rotates at 250 rpm while taking a left turn. The rotation of the left axle in rpm will be __________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

To obtain 200 kg m of torque at the transmission output shaft, what gear ratio would be necessary? (Assume transmission efficiency 90% and input torque as 20 kg m)

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

In a simple planetary gear drive, the sun gear is used to give drive a plant carrier mounted with 3 planetary gears, while ring gear is held stationary. If sun gear and all other planetary gears have 20 teeth each and ring gear has 60 teeth, the gear ratio will be __________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

If a driven pulley is made at 350 rpm by a driving pulley of 0.3 m diameter running at 1400 rpm. Determine length of open belt when the pulleys are 4 meters apart.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor has 8 forward speeds. The speed ratio varies in exact geometrical progressions. If the speed ratio in highest and lowest gear are 14.9:1 and 108:1, the geometrical constant will be __________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The centre to centre distance between two sprockets of chain drives is 600 mm. The chain drive is used to reduce the speed from 160 rpm to 90 rpm. The driving sprocket has 18 teeth and pitch circle diameter of 480 mm. Determine the pitch of the chain and teeth on driven sprocket.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Two pulleys are connected by a belt. The sum of the diameters of two pulleys is 90 cm and while the one makes 50 rpm, the other makes 20 rpm. Find the diameter of other pulley.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Determine the length of cross belt of connecting two pulleys 5 cm apart. The diameter of driving and driven pulleys are 1.25 m and 0.75 m respectively.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Miter gear is a type of ________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A tractor has 1.6 m rear wheel diameter. If the e gear ratio of final drive and differential gear is 5:1 and 4:1 respectively calculate forward speed of tractor in kilometre per hour.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

A single reduction gear of 120 KW with a pinion of 150 mm pitch circle diameter and speed 550 rpm is supported in bearings on either side. Calculate the total load due to power transmission.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Gear lubricant should be changed ____________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Cream separator has which gear?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

The flywheel of a hand operated chaff cutter with 4 cutting knives is rotated at 60 rpm and is connected to worm gear assembly for rotating feed rollers. The number of teeth and threads of worm gear and worm are 20 and 2 respectively. What would be the chaff length? (Diameter of feed roller is 15 cm)

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

A V-belt is used to transmit 5 KW at 17 m/s, the included angle of the belt is 38°, the density of the belt is 1.25 g/cm^3, contact angle on smaller pulley is 150°, tension on the belt is adjusted by providing idlers. Find tension at tight and slack side of belt.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

While testing a wheat thresher at recommended throughout 80 Nm torque is recorded at 850 rpm at the main shaft of the threshing cylinder, which is operated by a 200-mm diameter pulley. The overload factor and unit mass of V-belt are 1.2 and 0.9 kg/m respectively. At condition of maximum power transfer the maximum tension in V-belt in N is __________

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

Determine the length of the chain having 200 mm pitch and is used for speed reduction from 340 rpm to 120 rpm. The numbers of teeth on driving and driven sprockets are 20 and 40 respectively. The centre to centre distance between 2 sprockets is 540 mm and diameter of driven sprocket is 450 mm.

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+2 votes

1 answer

Which of the following rollers are used for external drive?

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

+1 vote

1 answer

In chain drives, for higher speed and loads, suitable chains to be used are ______

asked Jan 29, 2022 in Farm Machinery by Olivia (38.9k points)

...